Place of Origin:
China
Brand Name:
SuspAir
Certification:
CE
Model Number:
4809034010
Structure: Multi-layer reinforced cord anti-aging rubber bellows with plastic upper cover and special curved air nozzle. 100% OEM structure, fully compatible with original height control and auto-leveling system for heavy-duty SUV.
Notes:
Remark: 48090-34010 is the standard aftermarket reference number for Toyota Sequoia rear left air spring.
A: No. Strictly rear left only. The right air spring has different nozzle angle and structure (OE: 48080-34020), non-interchangeable.
A: Replace only the air spring if the compressor works normally. If the compressor is overloaded, noisy or overheated for a long time, simultaneous replacement is recommended to extend system lifespan.
A: Yes. Professional Toyota diagnostic tool is required for chassis height calibration to eliminate fault codes and height deviation.
A: 12-month standard warranty. Cover natural cracking and slow air leakage. Exclude collision damage, improper installation and friction wear caused by modified chassis.
A: Verify by 17-digit VIN code or check the OE number printed on the original air spring.
A: Reinforced cord rubber structure adapts to heavy-load conditions. Please avoid sharp stone scratches and chassis friction to prolong service life.
Send your inquiry directly to us
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews