Place of Origin:
China
Brand Name:
SuspAir
Certification:
CE
Model Number:
37107916201、 37107916202
Product Info | OE: 37107916201(Rear Left), 37107916202(Rear Right)
Product Name: Rear Air Spring Repair Kit
Important Note: Only air spring bladder repair kit, without shock absorber core and EDC sensor harness. 37107916201=Rear Left; 37107916202=Rear Right. Non‑interchangeable, only for AWD version, different OE numbers for 2WD.
OE Number: 37107916201(Rear Left), 37107916202(Rear Right)
Product Type: Air Spring Repair Kit (only rubber bladder, exclude shock absorber core & EDC sensor harness)
Mounting Position: Rear Suspension‑Left:37107916201; Rear Suspension‑Right:37107916202
Structure: Multi‑layer reinforced anti‑aging rubber air bladder, equipped with clamping clamps and sealing o‑rings. Suitable for vehicles with intact original shock absorber core and sensor harness. Replace leaking bladder individually while re‑using original shock tube and sensor harness, no need to replace complete strut assembly. Fully compatible with original air suspension system to realize chassis height adjustment and auto‑leveling function.
⚠️Notice:
- This repair kit is only for AWD version, not fit for 2WD vehicles.
- Not applicable if shock absorber core is oil‑leaking, damping failure or sensor harness damaged. Complete strut assembly replacement is required.
Rolls‑Royce Phantom VIII (Including EWB Extended Wheelbase)
Year Range: 2018‑2023
Chassis Code: RR21, Only for All‑Wheel Drive (AWD /4WD)
Notes:
Main OE:
Rear Left: 37107916201
Rear Right: 37107916202
Alternative OE: 37107916200, 37106887563, 37106887564
Remark: 37107916201 / 37107916202 are standard aftermarket reference OE numbers for Rolls‑Royce Phantom VIII AWD rear air spring repair kit.
Q1: Can 37107916201 and 37107916202 be interchanged?
A: No. 37107916201 is for rear left, 37107916202 is for rear right. Different pipeline and mounting angle, please order separately according to side.
Q2: Can this repair kit be used on 2WD Phantom VIII?
A: No. This kit is specially designed for AWD. 2WD vehicles require dedicated 2WD OE numbers. Improper installation causes dimension mismatch and air leakage.
Q3: When to use repair kit and when to replace full strut assembly?
A: Choose this repair kit when shock absorber core is oil‑free and EDC sensor harness intact, only rubber bladder leaks. Full strut assembly must be replaced if shock tube oil leaking, damping failure or sensor harness broken.
Q4: Need to replace air compressor together?
A: Just install this repair kit if only bladder leaks and compressor works normally. If compressor works under long‑term overload with noise or overheating, inspect or replace compressor to extend whole suspension service life.
Q5: Is professional calibration required after installation?
A: Yes. Professional diagnostic tool is required to execute body height calibration, otherwise height deviation and suspension fault codes may occur.
Q6: Warranty policy? Does air leakage covered by warranty?
A: 12‑month standard warranty. Covers natural aging cracking and natural slow leakage. Excludes collision damage, improper installation with loose clamp, chassis scratch and modification damage.
Q7: How to confirm compatibility?
A: 1. Check chassis configuration by 17‑digit VIN code and confirm AWD. 2. Disassemble and inspect: confirm shock core no oil leakage, EDC sensor harness intact, cross‑check OE number printed on old bladder.
Material: Multi‑layer weather‑resistant rubber bladder + matching clamps & sealing o‑rings
Installation Position: Rear Suspension‑Left 37107916201 / Rear Suspension‑Right 37107916202 (AWD Only, Repair Kit Only, Exclude Shock Absorber Core)
Pressure Resistance: 0‑1.4MPa High Pressure Resistant
Service Life: 80,000 KM+ Durability
Features: Air Spring Repair Kit, Reuse Original Shock Tube, Leak‑proof, Aging‑resistant, For Luxury Vehicle, AWD Special
Quality Standard: ISO9001 Certified Aftermarket Quality
Send your inquiry directly to us
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews