48095-48010 Original Air Suspension Solenoid Valve Block For Lexus RX II (XU30) 2003-2013

Original OE Number: 48095‑48010

Product Name: Lexus / Toyota Air Suspension Distribution Valve, Air Suspension Solenoid Valve Block Assembly, Air Suspension Height Control Distribution Valve, EAS Air Suspension System Air Pressure Shunt Control Valve

Installation Position: Chassis air suspension compressor pipeline assembly, core main‑control valve of vehicle height control system. Universal for whole vehicle, no front‑rear or left‑right distinction. It performs independent inflation, high‑pressure stabilization, static pressure‑holding, dynamic pressure‑relief balance and intelligent ride‑height adjustment for four‑wheel air springs. It is the core vulnerable control component for Lexus RX II (XU30) and Toyota high‑trim Highlander air‑suspension models.

Product Description

48095‑48010 is OEM‑spec air suspension distribution valve for Toyota‑Lexus mid‑size luxury SUV, compatible with Lexus RX II (XU30) 2003‑2013 and Toyota Highlander high‑trim versions equipped with factory air suspension. As thecore pressure‑control hub of Japanese‑SUV EAS intelligent air suspension system, it precisely manages air intake, pressure stabilization, pressure‑lock and dynamic pressure‑relief logic of four air springs. It balances vehicle body height in real‑time, filters road vibration, improves high‑speed stability and off‑road comfort, and solves common aftermarket failures such as body tilt, parked‑sag and slow height response. It is a high‑frequency wearable core part for this SUV platform air‑suspension system.

The original distribution valve for Lexus RX II(XU30) works under harsh chassis environment: mud, damp dust accumulation, alternating high‑low temperature, frequent city start‑stop and continuous high‑pressure highway operation. Factory sealing rubber rings tend to harden and crack. Carbon deposit causes valve‑core sticking and slow solenoid response, bringing about minor air leakage, insufficient pressure‑holding and pressure‑relief malfunction. It is widely known as a common failure‑prone spare part in aftermarket.

Typical failure symptoms: body sag after parking, rear‑end drop, unilateral body tilt, inconsistent left‑right ride‑height, frequent non‑stop compressor cycling, slow‑stuck height adjustment, height‑adjustment failure, dashboard air‑suspension warning lamp on, fault codes for air leakage, abnormal pressure‑holding and height calibration failure. Long‑term defective operation will burn out air‑suspension compressor and trigger full‑system breakdown with expensive repair cost.

This 48095‑48010 air‑suspension distribution valve is 1:1 reproduced strictly following OEM OE data. Valve runner aperture, solenoid switching frequency, high‑pressure resistance rating, ECU signal parameters, plug‑pin definition and pipeline port dimensions fully comply with OEM standards. Built with high‑strength precision aluminum‑alloy valve body, high‑low‑temperature resistant high‑pressure fluororubber sealing kit and anti‑sticking rust‑proof precision electronic valve‑core with upgraded anti‑carbon‑deposit & anti‑aging structure. It thoroughly eliminates original defects including pressure‑relief leakage, valve sticking failure, delayed response and poor pressure‑holding performance.

Features precise air shunting, stable pressure stabilization, corrosion resistance, wide‑temperature tolerance, zero‑leakage under long‑term high‑pressure and zero‑error ECU compatibility. Direct non‑destructive in‑situ replacement, no wiring modification, no drilling and no programming required. Fully compatible with original Lexus and Toyota air‑suspension control system. It completely repairs typical air‑suspension faults for Lexus RX II(XU30) and Highlander high‑trim: parked‑vehicle sag, body tilt, air leakage, over‑worked compressor, abnormal height adjustment and air‑suspension warning. Low rework rate, ideal spare‑part for SUV repair workshops, parts wholesale and cross‑border export.

Core Advantages

• ✅ 1:1 OEM precise reproduction, fully fits Lexus RX II (XU30) 2003‑2013 and Toyota Highlander air‑suspension models with identical parameters, mounting holes and ECU signals
• ✅ Solves Japanese‑SUV air‑suspension common faults: parked‑body sag, rear‑end drop, unilateral tilt, uneven ride‑height, air leakage, jerky lifting and air‑suspension alarm
• ✅ Upgraded anti‑aging seal & anti‑sticking valve‑core structure, anti‑carbon‑deposit, anti‑mud‑sand corrosion, wide‑temperature adaptability, stable pressure‑holding without leakage under long‑term high‑pressure
• ✅ Single SKU covers multiple mainstream SUV models, large market circulation volume, accurate compatibility and simple stocking
• ✅ Whole‑vehicle universal without front‑rear / left‑right distinction, non‑destructive bolt‑on installation, no modification or coding, finish after leak‑test & fault‑code clearing
• ✅ Restores accurate four‑wheel air‑pressure distribution, corrects body‑level deviation and recovers OEM premium chassis comfort and high‑speed driving stability

Compatibility Instruction: This valve is model‑specific air‑suspension distribution valve for Lexus RX II(XU30) and Toyota Highlander. Only fits high‑spec units with factory air suspension. Mechanical‑spring low‑trim models and other series lack corresponding air‑suspension pipelines and ECU modules and cannot be installed.

Exact Compatible Models List

1. Lexus RX II (XU30): 2003‑2013 all factory air‑suspension versions
2. Toyota Highlander: High‑trim versions with factory air suspension

Main OE Number: 48095‑48010

Interchangeable OE Number: No alternative iterative OE numbers. It is the primary factory reference OE for these models. All aftermarket equivalents take this number as interchange standard.

Interchange Remark: 48095‑48010 is the sole base OEM number for Lexus RX II(XU30) air‑suspension distribution valve. Aftermarket assemblies share identical structure, interface dimension, ECU parameters and pressure‑resistance rating. Direct non‑destructive replacement without modification or programming.

Q1: Which vehicles does 48095‑48010 fit?

A: Exclusively for Lexus RX II (XU30) 2003‑2013, and Toyota Highlander high‑trim vehicles with factory air suspension. Not applicable for low‑trim non‑air‑suspension and other series models.

Q2: Does this valve have front/rear or left/right position distinction?

A: No position difference. Universal for whole vehicle. One single SKU covers all matching units for simple stocking.

Q3: Can it be fitted on mechanical‑spring low‑trim RX or Highlander?

A: Not applicable. Only factory air‑suspension high‑spec vehicles have matching pipelines, control modules and mounting positions. Mechanical chassis cannot support installation.

Q4: Is coding or programming required after replacement?

A: No programming needed. After in‑situ replacement, evacuate pipeline air, perform leak‑test, clear fault codes and calibrate ride‑height, vehicle ECU will recognize and adapt automatically.

Q5: What symptoms require valve‑block replacement?

A: Body sag after parking, rear‑end drop, unilateral tilt, uneven four‑wheel height, frequent compressor cycling, slow‑jerky lifting, air‑suspension warning lamp and fault codes for air leakage / pressure‑hold failure. Installing brand‑new valve block can realize complete repair.

Q6: Can it interchange with LS460 series distribution valves?

A: Not interchangeable. SUV‑version and flagship‑sedan‑version valves differ in valve runner, pressure‑resistance parameter and ECU logic, mixed installation is forbidden.

1. OEM & Private‑Label Customization: Support custom logo printing, neutral no‑label export packaging and customized color boxes, suitable for Amazon, eBay, AliExpress, and other cross‑border platforms.
2. Bulk Supply Service: 48095‑48010 air‑suspension distribution valve kept in long‑term stock. Support single‑item wholesale, large‑volume orders and full‑container export, stable supply, fast delivery and competitive price.
3. Complete Air‑Suspension Parts Supply: One‑stop sourcing for full set of Lexus RX II(XU30) and Toyota Highlander air‑suspension accessories, including compressor, dryer, air filter, air springs, height sensor, shock assembly and repair kit.
4. E‑commerce Material Support: Provide real‑product photos, detailed close‑up shots, compatibility specification sheet and installation reference documents for store listing, short‑video promotion and store‑page decoration.