2923201400 Front Right Air Suspension Shock Strut with ADS for Mercedes-Benz W292

2923201400 Front Right Air Suspension Shock Strut with ADS for Mercedes-Benz W292

1. Product Introduction

Original OE Number: 2923201400

Product Name: Mercedes‑Benz GLE Front Right Air Shock Absorber, W292/C292 Front‑Right Air Suspension Strut Assembly, Electronic ADS Adaptive Damping Air Strut Assembly

Installation Position: Front axle right‑side exclusive. Fits Mercedes‑Benz GLE‑Class W292 / C292 chassis vehicles equipped with factory Airmatic air suspension with ADS adaptive damping system. It is a high‑frequency vulnerable service part for front‑right air suspension, undertaking load‑bearing, intelligent pressure adjustment, bump absorption and body posture calibration.

Product Description

OE 2923201400 is an original‑spec front‑right air strut assembly with ADS for Mercedes‑Benz GLE W292/C292 chassis, which serves as the core actuator of air suspension system. It integrates high‑pressure burst‑proof air spring, precision hydraulic damper cylinder, OEM‑spec ADS solenoid valve and multi‑layer composite high‑pressure sealing structure. It realizes core functions including vehicle load‑bearing, automatic ride‑height adjustment, real‑time adaptive damping according to road condition, bump filtering, corner roll suppression and high‑speed anti‑vibration stability. The ADS solenoid valve adjusts damping stiffness dynamically based on vehicle speed and road roughness, balancing comfort on paved roads and supporting performance at high speed & rough road, perfectly matching premium chassis tuning of Mercedes‑Benz GLE.

Air struts on W292/C292 GLE are high‑wear chassis components. Under continuous vehicle load, road impact, temperature cycling, chassis dirt‑moisture erosion and repeated inflation‑deflation cycles, original air spring rubber tends to harden, crack and develop slow air leakage. Inner sealing membrane fatigue failure, oil seal leakage, hydraulic oil degradation and aging‑stuck ADS solenoid will cause insufficient pressure retention, damping failure and electronic fault codes. Typical failure symptoms: front‑right sag, vehicle sink after overnight parking, obvious left‑right height difference, frequent air compressor cycling, slow lifting speed, height calibration failure, air‑suspension & ADS warning lamp on, bouncy performance over speed bumps, floating feeling at high speed and increased steering play. Driving with defective struts will accelerate wear of air compressor, valve block, air dryer and height sensor, leading to cascading air‑suspension damage and high repair cost.

This 2923201400 front‑right ADS air strut is 1:1 reproduced strictly following Mercedes‑Benz OEM specifications. Overall stroke, pressure‑bearing rating, damping coefficient, airspring burst pressure, ADS solenoid parameters, mounting hole positions, bushing and interface dimensions fully match OEM standards. It adopts thickened multi‑layer anti‑aging high‑pressure rubber airspring, double anti‑leak sealing structure, thickened anti‑rust piston rod, wide‑temperature long‑life hydraulic oil and high‑quality OEM‑equivalent ADS solenoid valve. Optimized anti‑aging, anti‑cracking, anti‑corrosion, anti‑fatigue and burst‑resistant performance solves common OEM defects such as air leakage, front‑end sag, weak damping, poor low‑temperature pressure retention and abnormal ADS signals. This is ADS‑equipped adaptive damping exclusive version, position‑specific for front right, direct bolt‑on installation without chassis modification. Air‑tightness test, ride‑height calibration and ADS matching calibration are required after installation, fully compatible with original Airmatic & ADS ECU. After replacement, it fixes front‑right collapse, slow air leakage, abnormal height adjustment, loose chassis, floating steering and ADS fault codes, restores tight original chassis texture with low rework rate. Ideal for repair‑shop maintenance, auto‑parts wholesale and cross‑border export business.

Core Advantages ✅ 1:1 OEM reproduction, position‑specific for OE 2923201400, zero error on mounting hole, stroke, damping and ADS electronic parameters, direct bolt‑on fit ✅ Solves W292/C292 common air‑suspension faults: front‑right sag, air leakage after parking, uneven body posture, air‑suspension warning, ADS fault codes, compressor over‑wear ✅ Multi‑layer thickened burst‑proof airspring, wide‑temperature resistance, anti‑aging & crack‑resistant, effectively reduces slow‑leak and sag risk ✅ OEM‑equivalent ADS solenoid valve with stable signal and sensitive adaptive adjustment, perfectly matches original intelligent damping control system ✅ Exclusive front‑right unit, work paired with front‑left strut to correct body tilt and improve driving stability & riding comfort ✅ Complete pre‑assembled unit, no extra accessories required, easy installation, restore original chassis performance after calibration

2. Custom Attributes for E‑commerce Listing

Brand: Mercedes‑Benz Chassis Code: W292 / C292 Compatible Models: Mercedes‑Benz GLE‑Class (GLE Coupe) Applicable Version: Factory Airmatic air suspension, with ADS adaptive damping system Non‑applicable Version: Non‑ADS air suspension, mechanical coil spring suspension, modified air suspension, other chassis (W166/X166) Applicable Years: 2015‑NOW Installation Position: Front axle, right‑side only, cannot interchange with front‑left Product OE: 2923201400 Product Type: Air Strut Assembly with ADS, Air Suspension Shock, Front Air Spring Strut, Electronic Adaptive Damping Air‑Suspension Assembly Assembly Feature: Brand‑new complete assembly including burst‑proof airspring, damper cylinder, ADS solenoid valve, full sealing kit, upper & lower mounting seats Material: High‑strength anti‑aging high‑pressure rubber airspring, anti‑rust precision piston rod, pressure‑resistant alloy cylinder tube, multi‑layer composite oil seal, long‑life hydraulic damping oil, high‑sensitivity ADS solenoid assembly Process Standard: OE‑spec reproduction, high‑pressure holding test, reciprocating fatigue test, high‑low temperature aging test, 100% air‑tightness inspection, damping calibration, ADS solenoid signal test Compatibility Note: Only fits W292/C292 GLE with factory ADS & Airmatic. Not for non‑ADS, mechanical spring or other chassis. Left‑right cannot be mixed. Sales Mode: Retail, bulk wholesale, full‑container export orders Inspection Standard: 100% air‑tightness pressure‑holding test, damping coefficient calibration, fatigue compression test, high‑low temperature pressure test, ADS signal inspection, full dimension & appearance check Packaging: Reinforced neutral carton; customized color box, neutral export package and private‑label OEM available Working Condition: City driving, highway travel and rough‑road condition; fully compatible with original Airmatic & ADS ECU logic Risk Warning: Exclusive for front‑right position, do not mix with front‑left strut. Pair‑replacement is recommended. Air‑leak test, ride‑height calibration and ADS matching calibration must be finished after installation. Recommended Matching Parts: Can be inspected & replaced together with air strut repair kit, air compressor, air dryer, valve block and height sensor to eliminate whole‑system hidden troubles.

3. Compatible Vehicles

Compatibility Instruction: OE 2923201400 is dedicated front‑right ADS‑equipped air strut for W292/C292 chassis, position‑specific part. Only fits 2015‑NOW Mercedes‑Benz GLE / GLE Coupe with factory Airmatic air suspension with ADS adaptive damping. Not compatible with non‑ADS air suspension, mechanical springs, modified air suspension or other chassis such as W166/X166. Left‑right struts cannot be interchanged.

Exact Compatible Model List

1. Mercedes‑Benz GLE‑Class SUV (W292) 2015‑NOW, factory Airmatic with ADS
2. Mercedes‑Benz GLE Coupe (C292) 2015‑NOW, factory Airmatic with ADS

4. Interchangeable OE Numbers

Main OE Numbers: 2923201400 Interchangeable OE Numbers: 2923200800, 2923204013, 2923204613, 2923203913

Interchange Remark: Above part numbers are iterative interchangeable OEM references for W292/C292 GLE front‑right ADS air struts. They share identical structure dimension, airspring pressure rating, damping parameters, ADS solenoid valve, mounting holes and ECU compatibility. Direct non‑destructive replacement without chassis modification.

5. FAQ

Q1: Which vehicles fit OE 2923201400? A: Fits Mercedes‑Benz W292/C292 GLE and GLE Coupe 2015‑NOW with factory Airmatic air suspension and ADS adaptive damping. Not for non‑ADS air suspension, mechanical springs or other chassis platforms.

Q2: Is this strut for front‑left or front‑right? Can left and right swap? A: This unit is front‑axle right‑side exclusive. Left‑right units differ in geometry, damping parameters and solenoid matching logic. Mix‑use is forbidden, otherwise body tilt, air‑suspension / ADS fault codes and abnormal height adjustment will occur.

Q3: Can I install this on vehicles without ADS system? A: Not applicable. This strut is built‑in with ADS solenoid valve. Non‑ADS vehicles lack corresponding wiring and control system, persistent fault codes will be triggered and adaptive damping function cannot work.

Q4: Does computer programming need after replacement? A: No coding required, but air‑leak test, ride‑height calibration and ADS solenoid matching calibration must be performed, clear fault codes before putting into service.

Q5: What symptoms indicate air strut replacement? A: Front‑right sag, vehicle sinks after overnight parking, obvious left‑right height difference, frequent compressor operation, slow lifting speed, air‑suspension / ADS warning lamp on, bouncy ride over pits, floating steering at high speed. These indicate air‑spring leakage or ADS solenoid failure, replacement is suggested.

Q6: Can I replace only one single front‑right strut? A: Pair‑replacement is strongly recommended. Old and new struts differ in pressure retention, damping response and ADS sensitivity. Single‑side replacement may cause unbalanced body posture and uneven corner roll, which affects driving safety.

Q7: Can multiple interchangeable OE numbers replace each other freely? A: Yes. 2923201400 and its iterative alternative OEs share identical parameters, structure and electronic compatibility. They are OEM upgraded replacement parts for direct bolt‑on fit.

6. Custom Service

1. OEM Private Label Customization: Support logo silk‑printing, neutral no‑label export package and customized color box, suitable for Amazon, eBay and other cross‑border platforms.
2. Bulk Supply Service: 2923201400 in stock. Support retail, large‑volume wholesale and full‑container export with stable supply and fast lead‑time.
3. Complete Air‑Suspension Parts Supply: One‑stop supply for full W292/C292 air‑suspension components: front & rear ADS air struts, air compressor, air dryer, valve block, height sensor, repair kits and more.
4. E‑commerce Material Support: Provide real‑product photos, close‑up pictures, OE cross‑reference table, compatible‑vehicle list and installation calibration reference documents for store listing and short‑video marketing.