37106877558 & 37106881062 Front Right Air Suspension Shock Strut with EDC for BMW 7-Series G11 G12 4 Matic
1. Product Introduction
Original Interchangeable OE Numbers (Iterative Compatible): 37106877558, 37106881062
Product Name: BMW G11/G12 7-Series XDrive/4MATIC Front Right Electronic Air Shock Absorber Assembly with Adaptive Damping
Mounting Position: Front axle right side (Exclusive for front right and 4WD/XDrive models only; Only compatible with G11/G12 high-spec 4WD air suspension vehicles, not for 2WD models or front left side. Perfectly paired with 4WD front left assembly)
Product Description
These two OE numbers are OEM iterative upgraded replacement parts, exclusively designed for the BMW G11/G12 7-Series XDrive/4MATIC four-wheel drive flagship models, serving as the dedicated front-right electronic adaptive air shock absorber assembly. 4WD vehicles feature completely different front axle load-bearing capacity, chassis stress structure and damping tuning logic compared with 2WD models, making this a high-frequency wearable maintenance part exclusive to 4WD flagship vehicles. Released for annual model updates and production line process upgrades, the two OE numbers deliver 100% mutual interchangeability in mounting hole positions, damping stroke, heavy-load parameters and electronic control signal logic. There is no need to distinguish old and new production batches in the aftermarket, enabling lossless direct bolt-on replacement. This is an integrated full assembly, equipped with explosion-proof high-pressure air spring, heavy-duty hydraulic damping cylinder dedicated for 4WD vehicles, OEM-style adaptive electronic solenoid valve, complete sealing components and mounting rubber mounts. All accessories are fully equipped for direct in-situ replacement without extra matching parts.
The BMW G11/G12 4WD 7-Series features a heavy curb weight, and its 4WD transmission structure brings far greater front axle load pressure than ordinary 2WD models. Adopting factory luxury comfort-oriented chassis tuning, long-term high-speed driving, full-load commuting and bumpy road conditions easily cause common faults of 4WD front-right air suspension. The air spring rubber ages under long-term compression, hardens and cracks with elastic attenuation, resulting in chronic slight air leakage, front-right vehicle sag, asymmetric left-right body height and overnight front collapse. The special 4WD hydraulic damping oil deteriorates over time, and aging high-pressure oil seals cause pressure leakage, leading to weak front-right damping, loose bouncing over road bumps, floating feeling at high speed, insufficient support during lane changes and cornering, loose chassis feel and a significant drop in luxury riding comfort. Signal drift and reduced sensitivity of the electronic solenoid valve trigger air suspension warning lights, disabled adaptive hardness adjustment and frequent start-stop operation of the air compressor. Long-term operation with faults will continuously wear precision accessories such as air distribution valves, height sensors and air pumps, causing cascading failures of the entire air suspension system and greatly increasing maintenance costs for 4WD flagship vehicles.
This G11/G12 4WD front right air shock absorber is 1:1 mold-manufactured strictly in accordance with BMW original exclusive 4WD OE data, with professional damping calibration for heavy-load and high-bearing working conditions of 4WD front axles. Adopting thickened multi-layer imported explosion-proof rubber air spring with wide temperature resistance, multi-layer composite high-pressure sealing structure, anti-rust precision piston rod, long-lasting anti-fade hydraulic oil dedicated for 4WD models and high-precision electronic components, it greatly improves aging resistance, crack resistance, air leakage resistance and fatigue resistance. It thoroughly solves common faults of 4WD front-right shock absorbers including air leakage, body sag, loose damping, unstable chassis and electronic function failure. Exclusively designed for G11/G12 4WD front right application, it is completely incompatible with 2WD versions and 4WD front left assemblies in structure and parameters. It supports lossless bolt-on installation without chassis modification or wiring coding. After installation, air tightness inspection, vehicle height calibration and air suspension adaptive matching calibration can fully restore original factory chassis stability and all intelligent air suspension functions of 4WD vehicles. Featuring ultra-low failure rate, it is widely applicable for high-end auto repair, precision auto parts stocking and cross-border export business.
Core Advantages
- Exclusive 4WD Fitment: Only compatible with G11/G12 XDrive/4MATIC four-wheel drive models, completely not for 2WD versions to avoid wrong installation and rework
- Dual OE Interchangeable: 37106877558 and 37106881062 support bidirectional replacement, covering all OEM production batches with zero stocking pressure
- Front Right Exclusive Structure: Precisely matches original 4WD front right parameters in hole position, pipeline and connector, prohibited from mixing with front left assembly
- OEM-matched electronic assembly with stable signal and zero fault codes, fully retains original intelligent adaptive damping function for 4WD vehicles
- Upgraded thickened explosion-proof air spring with wide temperature resistance and anti-aging performance, completely solves chronic air leakage and front sag faults of 4WD front right air suspension
- Professional calibration for 4WD heavy load, stronger bearing capacity, higher high-speed stability and sufficient cornering support to restore flagship 4WD tight chassis texture
- Perfectly paired with 4WD front left assembly, paired replacement completely solves asymmetric body posture and loose chassis problems of 4WD vehicles
2. Custom Attributes for E-commerce Listing
Brand Fit: BMW
Chassis Code: G11 / G12 (New 7-Series)
Vehicle Model: BMW 7-Series XDrive/4MATIC high-spec models with factory air suspension
Version Fit: Factory front electronic air suspension, high version with adaptive damping, exclusive for 4WD
Not Compatible: 2WD models, front left position, rear axle position, ordinary mechanical shock absorbers, old F01/F02 chassis, low-spec models without air suspension
Year Range: 2016‑Present BMW G11/G12 7-Series 4WD models with factory front electronic air suspension
Mounting Position: Front axle right side (Exclusive for front right & 4WD, not interchangeable for front left or 2WD vehicles)
Interchangeable OE Number: 37106877558, 37106881062
Product Type: 4WD Front Right Electronic Air Shock Absorber Assembly, G11/G12 7-Series XDrive Adaptive Air Suspension Strut
Assembly Status: Brand-new complete assembly (Including explosion-proof air spring, 4WD heavy-duty damping cylinder, electronic solenoid valve, full sealing kit, upper & lower mounting rubber mounts)
Material: High-strength multi-layer aging-resistant imported high-pressure rubber air spring, anti-rust precision piston rod, high-pressure alloy cylinder, multi-layer composite high-pressure sealing oil seal, long-lasting anti-fade hydraulic oil dedicated for 4WD, high-sensitivity electronic assembly
Manufacturing Standard: Replicated per original 4WD exclusive OE parameters, high & low temperature pressure test, 4WD heavy-load fatigue test, 100% air tightness pressure holding test, precise electronic signal calibration
Fitting Remark: Exclusive for front right of BMW G11/G12 4WD models, dual OE numbers are mutually interchangeable. Only fits XDrive/4MATIC high-spec air suspension models. Not compatible with 2WD, front left, rear axle and old chassis models. Recommended to replace in pair with 4WD front left assembly.
Sales Mode: Single retail, 4WD front axle left-right pair set, bulk wholesale, full container export order
Inspection Standard: 100% high-pressure air tightness leakage test, 4WD exclusive damping coefficient calibration, high & low temperature durability test, heavy load fatigue test, full electronic signal inspection, dimension & appearance inspection
Package: Neutral heavy carton, custom color box, unbranded export package, OEM logo labeling available
Working Condition: Suitable for business commuting, highway cruising, full-load travel and complex road conditions of BMW 7-Series 4WD models, fully compatible with original 4WD intelligent air suspension electronic control logic and heavy-load demands
Installation Tip: No chassis modification or wiring coding required. Air tightness inspection, vehicle height calibration and air suspension adaptive matching calibration are mandatory after installation.
Recommended Purchase: It is strongly recommended to replace front left and right in pair for 4WD vehicles to restore symmetrical front posture and consistent damping support, eliminate uneven chassis height, high-speed instability and insufficient cornering support. Can be matched with air suspension repair kit and height sensor for synchronous maintenance.
3. Compatible Vehicle List
Compatibility Note: This group of OE numbers are exclusive iterative interchangeable parts for G11/G12 new 7-Series XDrive/4MATIC front right electronic air shock absorber. Dual numbers are fully interchangeable, only fitting 2016+ G11/G12 chassis high-spec 4WD models with factory front adaptive air suspension. Strictly incompatible with 2WD, front left, rear axle, old F01/F02 chassis and low-spec mechanical suspension models.
Precise Compatible Models
- BMW 7-Series G11/G12 (2016–Present): 740d XDrive, 740i XDrive, 750d XDrive, 750i XDrive, M760Li XDrive high-spec versions with factory front electronic air suspension
4. Interchangeable OE Numbers
Fully Interchangeable OE List (Bidirectional Iterative Replacement, 100% Compatible):
37106877558, 37106881062
Interchange Remark: The two OE numbers are original iterative upgraded replacement parts exclusive for BMW G11/G12 4WD front right air suspension. With identical mounting hole position, 4WD damping stroke, heavy-load parameters and electronic control logic, they can be directly interchanged and installed in the aftermarket without modification, coding or fitting deviation.
5. FAQ
Q1: Are 37106877558 and 37106881062 interchangeable?
A: Yes. The two numbers are original iterative universal parts exclusive for 4WD models, with identical parameters, dimensions, electronic control and hole positions. They can be freely interchanged and bolted on 4WD vehicles without any adaptation failure.
Q2: Can this shock absorber fit 2WD G11/G12 models?
A: No. This is an exclusive XDrive 4WD version. 2WD and 4WD models differ greatly in front axle load, damping parameters and stress structure. Forced installation will cause abnormal support, incorrect body posture and fault codes, completely incompatible.
Q3: Can it be installed on front left or rear axle?
A: No. This unit is strictly exclusive for 4WD front right. Front left and rear shock absorbers have different structural parameters, and misplaced installation will cause matching failure, suspension function paralysis and fault codes.
Q4: Does this assembly come with original adaptive electronic control function?
A: Yes. It is equipped with original-matched ADS adaptive electronic solenoid valve, fully supporting the original intelligent damping hardness adjustment function of 4WD high-spec models. It cannot be replaced with mechanical shock absorbers or 2WD air suspension struts.
Q5: Is coding required after replacement?
A: No coding required. After installation, only air tightness inspection, vehicle height calibration and air suspension adaptive matching calibration are needed, then clear fault codes for normal operation.
Q6: What symptoms indicate replacement of this 4WD front right shock absorber?
A: Front right vehicle sag, right-front lower body height, overnight front collapse, loose chassis bouncing over bumps, unstable high-speed driving, insufficient cornering support, frequent air compressor operation, air suspension warning light, front axle abnormal noise and obvious decline of 4WD riding comfort.
Q7: Can I replace only the damaged front right single strut?
A: Not recommended. G11/G12 4WD chassis has extremely high requirements for left-right damping and support consistency. Performance differences between new and old parts will cause asymmetric front posture, driving deviation, high-speed instability and uneven tire wear. Pair replacement of front left and right is strongly recommended for 4WD vehicles.
Q8: Is it compatible with old F01/F02 7-Series 4WD models?
A: Not compatible at all. Old chassis structure, air suspension system and electronic interfaces are completely different from new G11/G12, no replacement available.
6. Custom Service
- OEM Labeling Service: Support logo silk printing, neutral unbranded export packaging and custom color boxes, suitable for cross-border platforms including Amazon, eBay, AliExpress.
- Bulk Supply Service: G11/G12 4WD front right electronic air shock absorbers are in stable stock with full coverage of dual OE numbers. Support single retail, 4WD front pair sets, bulk wholesale and full container export orders, with stable supply, fast delivery and competitive price advantages for high-end BMW 4WD parts.
- Complete 4WD Air Suspension Supporting Parts: One-stop supply of full series of G11/G12 4WD air suspension accessories, including 4WD exclusive front & rear air struts, air compressors, distribution valves, height sensors and repair kits, supporting complete vehicle maintenance orders.
- E-commerce Material Support: Provide free product real photos, detailed close-up images, dual OE parameter comparison tables, G11/G12 4WD fitment lists and installation calibration documents for store listing, short video promotion and detail page decoration.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews