37106877554 & 37106874588 & 37106899038 & 37106877556 & 37106899040 & 37107915970 Front Right Air Suspension Shock Strut for BMW 7-Series G11 G12  2 Matic

Original Interchangeable OE Numbers (Iterative Compatible): 37106877554, 37106874588, 37106899038, 37106877556, 37106899040, 37107915970

Product Name: BMW G11/G12 7-Series Front Right Air Shock Absorber Assembly with Adaptive Damping

Mounting Position: Front axle right side (Exclusive for front right, not interchangeable for front left; For BMW G11/G12 high-spec models with factory front air suspension, OEM iterative upgraded parts for multiple batches. Perfectly matched pair with the front left OE set)

This group of OE numbers are iterative upgraded OEM parts for different production batches and model years. They are fully compatible with the front-right electronic air shock absorber assembly specially used for high-spec models of the new BMW 7 Series G11/G12 chassis. It is a core high-frequency wearable maintenance spare part for the air suspension system of BMW flagship luxury sedans. Due to annual model updates and production line process fine-tuning, BMW has derived multiple alternative OE numbers. All part numbers in this group share identical mounting hole positions, damping stroke, vehicle load parameters and electronic control signal logic, which are 100% interchangeable. There is no need to distinguish between old and new part numbers in the aftermarket, and direct bolt-on replacement is available. This is an integrated complete assembly, including explosion-proof high-pressure air spring, flagship dedicated precision hydraulic damping cylinder, OEM-style adaptive electronic solenoid valve, full set of sealing components and mounting rubber mounts. All accessories are complete without extra matching parts required for direct bolt-on replacement.

The flagship BMW G11/G12 7-Series has a high curb weight and heavy load on the front axle. The original chassis is tuned for luxury and comfort. The front air shock absorber continuously filters road bumps and supports the weight of the front end during long-time highway cruising, urban stop-and-go commuting, rough road driving and aging caused by seasonal temperature changes. Common factory failures easily occur: the rubber of the front right air spring ages, hardens, cracks and loses elasticity, resulting in slow air leakage, front right sag, uneven body height between left and right, overnight front collapse and body sinking after parking overnight. Deterioration of internal hydraulic damping oil and aging of high-pressure sealing oil seal cause damping weakness, loose bouncing of front right over pits, unstable driving at high speed, insufficient support during lane change, overtaking and cornering, reduced chassis tightness and sharp drop of overall luxury riding comfort. Carbon deposition and signal drift of the electronic adaptive solenoid valve trigger air suspension warning light on dashboard, failure of adaptive hardness adjustment function and frequent start-stop of air compressor. If kept in service with faults, it will wear air distribution valve, height sensor, air pump and other precision accessories, cause cascading failure of the whole air suspension system and greatly increase the maintenance cost of flagship vehicles.

This front right air shock absorber for G11/G12 is 1:1 molded strictly according to multiple OEM OE data of BMW, with special damping calibration for heavy load working condition of front axle of 7-Series flagship. It adopts thickened multi-layer imported explosion-proof rubber air spring with wide temperature resistance, multi-layer composite high-pressure sealing structure, anti-rust precision piston rod, long-lasting anti-fade hydraulic oil and high-precision electronic components to improve aging resistance, crack resistance, air leakage resistance and fatigue resistance. It completely solves common defects including front right air leakage, front sag, weak damping, unstable chassis, electronic error and disabled adaptive function. All iterative OE numbers fully cover all model years of G11/G12 high-spec models. Direct bolt-on installation without chassis modification or wiring coding. After installation, air tightness inspection, vehicle height calibration and air suspension adaptive matching calibration are required to fully restore original flagship chassis texture and all intelligent air suspension functions, with low return rate. Suitable for high-end auto repair, bulk wholesale and cross-border export. It is the matching counterpart for the front left shock absorber.

✅ Multiple interchangeable OE codes: 6 OEM iterative numbers fully interchangeable, covering all G11/G12 high-spec models, solving batch mismatching problem ✅ Exclusive front right structure, hole position, pipeline, connector and damping parameter precisely match OEM front right data, strictly prohibited mixed installation with front left ✅ OEM-style electronic assembly with stable signal, no fault code, fully retains original intelligent adaptive damping function ✅ Upgraded thickened explosion-proof air spring, wide temperature resistance, anti-aging & anti-cracking, solves chronic air leakage and front right sag of front air suspension ✅ Damping calibrated for flagship heavy front axle load, stable at high speed, sufficient cornering support, perfectly restore original luxury riding texture ✅ Brand-new complete assembly, full accessories included, bolt-on installation & simple calibration, ultra-low failure rate for luxury flagship vehicle aftersales ✅ OEM matched pair model (matched with full set of front left OE), strong aftermarket replacement demand, no stocking pressure

Brand Fit: BMW

Chassis Code: G11 / G12 (New 7-Series)

Vehicle Model: BMW 7-Series high-spec models with factory front air suspension

Version Fit: Factory front electronic air suspension, high version with adaptive damping

Not Compatible: Front left position, rear axle position, low-spec models with ordinary mechanical shock absorber, old F01/F02 chassis, models without electronic air suspension

Year Range: 2015‑Present BMW G11/G12 7-Series with factory front electronic air suspension

Mounting Position: Front axle right side (front right only, cannot replace front left)

Interchangeable OE Number: 37106877554, 37106874588, 37106899038, 37106877556, 37106899040, 37107915970

Product Type: Front Right Electronic Air Shock Absorber Assembly, G11/G12 7-Series Front Right Adaptive Air Suspension Strut

Assembly Status: Brand-new complete assembly (including explosion-proof air spring, flagship damper cylinder, electronic solenoid valve, full sealing kit, upper & lower mounting rubber mounts)

Material: High-strength multi-layer aging-resistant imported high-pressure rubber air spring, anti-rust precision piston rod, high-pressure alloy cylinder, multi-layer composite high-pressure sealing oil seal, long-lasting anti-fade hydraulic damping oil, high-sensitivity electronic assembly

Manufacturing Standard: Replicated per multiple OEM OE parameters, high & low temperature pressure test, flagship heavy-load fatigue test, 100% air tightness pressure holding test, electronic signal precise calibration

Fitting Remark: Exclusive for front right of BMW G11/G12 7-Series, multiple OE numbers are OEM iterative interchangeable. Fits high-spec models with front electronic air suspension. Not compatible with front left, rear axle, old chassis or mechanical shock absorber models. Recommended to replace in pair with front left assembly.

Sales Mode: Single retail, front axle left-right pair set, bulk wholesale, full container export order

Inspection Standard: 100% high-pressure air tightness leakage test, damping coefficient calibration, high & low temperature durability test, heavy load fatigue test, full electronic signal inspection, dimension & appearance inspection

Package: Neutral heavy carton, custom color box, unbranded export package, OEM logo labeling available

Working Condition: Suitable for BMW 7-Series business commute, highway cruise, full load travel and complex road conditions, fully compatible with original intelligent air suspension electronic control logic

Installation Tip: No chassis modification or wiring coding required. Air tightness inspection, vehicle height calibration and air suspension adaptive matching calibration are mandatory after installation.

Recommended Purchase: Replace front axle left and right in pair (matched with dedicated front left assembly) to restore symmetrical front posture and consistent damping support, recover original flagship tight chassis texture and comfort. Can be matched with air suspension repair kit and height sensor for synchronous maintenance.

Compatibility Note: This group of 6 OE numbers are exclusive iterative interchangeable part numbers forfront right electronic air shock absorber of BMW G11/G12 new 7-Series. All numbers are mutually interchangeable. Only fits BMW G11/G12 chassis after 2015, high-spec models equipped with factory front adaptive air suspension. Not compatible with front left, rear axle, low-spec mechanical shock absorber models or old F01/F02 chassis. It forms a complete front axle pair set with the front left multi-OE assembly.

1. BMW 7-Series G11/G12 (2015–Present): 730d,730i,740d,740i,750d,750i,M760Li high-spec versions with factory front electronic air suspension

Fully interchangeable OE list (All are iterative replacement parts, 100% compatible):

37106877554, 37106874588, 37106899038, 37106877556, 37106899040, 37107915970

Interchange Remark: The above six part numbers are OEM iterative upgraded replacements for different production batches and years. The front-right mounting hole, damping stroke, body load parameter and electronic control logic are fully consistent. Any of them can be directly installed without modification or coding, no fitting deviation.

A: Yes. The six OE numbers are OEM iterative interchangeable parts, batch-adjusted versions for G11/G12 front right air suspension. Dimension, parameter, electronic circuit and hole position are fully identical, interchangeable and bolt-on directly in aftermarket without fitting issue.

A: No. This unit is exclusively for front right of G11/G12. Front left and front right differ in structure, pipeline, connector and damping parameter, cannot be swapped. Front left must use dedicated front left OE shock absorber assembly.

A: Not compatible at all. Old F01/F02 has completely different chassis structure, air suspension system, electronic connector and mounting size compared with new G11/G12, cannot be fitted.

A: No. This is front-right exclusive electronic air strut for G11/G12. Rear shock absorber has different structure and parameters; low-spec mechanical models have no electronic connector. Improper installation causes mismatching, fault code and suspension failure.

A: No coding required. After installation, just perform air tightness inspection, vehicle height calibration and air suspension adaptive matching calibration and clear fault codes for normal operation.

A: Front right sag, vehicle lower on right front, overnight front collapse, loose response over bumps on front right, unstable driving at high speed, insufficient cornering support, frequent air compressor activation, air suspension warning light, abnormal chassis noise and obvious comfort drop.

A: Not recommended. G11/G12 flagship chassis requires highly consistent damping and support force for front left and right. Performance difference between new and old units will lead to asymmetric front posture, pulling, high-speed instability and uneven tire wear. Recommended to replace front axle left and right as pair set.

A: Not possible. Low-spec models have no air suspension system, no electronic module, no air pump and pipeline. Hardware mismatch, cannot be directly upgraded.

1. OEM Labeling: Support logo silk printing, neutral unbranded export packaging and custom color box for cross-border platforms including Amazon, eBay, AliExpress.

2. Bulk Supply: G11/G12 front right electronic air shock absorber in stock continuously, full coverage of 6 OE numbers. Available for single retail, front axle left-right pair set, bulk wholesale and full container export. Stable stock, fast lead time and competitive price for premium BMW auto parts.

3. Complete G11/G12 Air Suspension Package: One-stop supply of full BMW G11/G12 7-Series air suspension spare parts, including front & rear air struts, air springs, air compressors, distribution valves, height sensors and repair kits for complete vehicle maintenance order.

4. E-commerce Material Support: Free product photos, close-up detail pictures, multi-OE matching table, G11/G12 fitment list and installation calibration documents for store listing, short video promotion and detail page decoration.