A2223204813 Rear Right Air Suspension Shock Strut for Mercedes-Benz  W222 V222 X222 S550  (2014--)

Original OE Number: A2223204813 (Abbreviation: 2223204813)

Product Name: Mercedes-Benz W222 Rear Right 2WD Air Strut Assembly, S-Class Rear Axle Right Airmatic Basic Air Suspension Shock Absorber, Rear Right 2MATIC 2WD Air Strut Assembly without ADS

Installation Position: Rear axle right side (Exclusive for 2WD, rear right only, basic air suspension without ADS, not interchangeable with 4MATIC, rear left or ADS-equipped models). Matched OEM part number: Rear Left 2WD A2223204713. Fits Mercedes W222 S-Class equipped with factory basic Airmatic air suspension, 2MATIC 2WD, no ADS adaptive damping.

Product Description A2223204813 is OEM-spec rear right basic air strut assembly without ADS exclusively for Mercedes W222 S-Class 2MATIC 2WD. It is the entry-level air suspension version without ADS electronic solenoid valve, only compatible with 2WD vehicles. The structure, damping, stroke and electronic setup are completely different from 4MATIC ADS version. This rear right air strut for W222 2WD relies on pure hydraulic damping plus air spring to realize ride height adjustment and shock absorption. No adaptive damping control logic. Fully matches the original factory chassis calibration parameters of W222 2WD entry model, focusing on comfortable damping, stable body posture and durability for daily driving.

W222 2WD vehicles feature lighter chassis load and comfort-oriented setup. After long-time city driving, bumpy roads, temperature cycling, chassis moisture corrosion and repeated inflation & deflation cycles of air suspension, the air spring tends to age. Common factory failures: rubber air spring cracking, hardening, bulging and slow air leakage, overnight rear end sagging; degraded internal hydraulic oil and worn oil seals lead to soft damping, loose rebound and insufficient rear support. There is no electronic fault, but uneven body posture, slow height adjustment and obvious bouncing over bumps. Typical symptoms: rear right sagging, lower right rear body, uneven rear height, frequent air compressor activation, slow or stuck chassis height adjustment, bouncy rear end over speed bumps, poor rear stability at high speed and loose chassis noise. Failure to replace timely will accelerate wear of air compressor, valve block and height sensor, leading to premature failure of the whole air suspension system and higher maintenance cost.

This A2223204813 2WD rear right air strut is 1:1 reproduced strictly according to Mercedes OEM 2WD data. 2WD-specific damping coefficient, air spring pressure rating, mounting holes and stroke dimension are 100% matched with OEM, different from high-end 4MATIC ADS version. Adopts thickened multi-layer temperature-resistant burst-proof rubber air spring, multiple high-pressure sealing structure, rust-proof precision piston rod and long-life anti-degradation hydraulic oil, improving anti-aging, crack resistance, fatigue resistance and burst pressure, suitable for light-weight chassis load of 2WD models. It fundamentally solves common defects of W222 2WD: rear right air leakage, rear sagging, tilted body, loose chassis and abnormal height adjustment. This is 2WD basic version without ADS. Direct bolt-on installation without chassis modification, no coding required. After installation, air tightness inspection and vehicle height calibration are required to restore all original air suspension functions, returning the original comfortable chassis feel of W222 2WD. Low return rate, suitable for garage maintenance, auto parts stocking and cross-border e-commerce export.

Core Advantages

• ✅ 1:1 OEM reproduction exclusively for 2WD, rear right only, no ADS, dedicated for 2MATIC. Not compatible with 4MATIC ADS version, precise bolt-on fitment
• ✅ Solves W222 2WD common faults: rear right sagging, overnight rear drop, tilted body, frequent compressor startup and slow/stuck height adjustment
• ✅ Upgraded thick multi-layer burst-proof air spring, temperature resistant & anti-aging, adapted for light 2WD load to eliminate slow air leakage and rear sag
• ✅ Pure mechanical hydraulic damping structure, no electronic faults, high stability and low failure rate, matching basic entry air suspension system
• ✅ Reinforced anti-fatigue damping design, eliminates rear bouncing over bumps, loose chassis and rear sway noise during 2WD driving
• ✅ Brand new full assembly with complete accessories, no coding needed. Restore OEM comfortable ride quality after calibration

Brand: Mercedes-Benz

Chassis Code: W222

Vehicle Model: Mercedes S-Class Luxury Sedan (2MATIC 2WD Version)

Version Requirement: Factory Basic Airmatic Air Suspension, without ADS Adaptive Damping, exclusive for 2MATIC 2WD

Not Compatible: 4MATIC AWD vehicles, air suspension with ADS, ABC active body control, mechanical coil spring suspension, other chassis W221/W223, rear left position

Applicable Years: 2013‑2020 all W222 2WD models

Installation Position: Rear axle right side (Rear right exclusive, cannot fit rear left or 4WD models, no ADS)

Product OE: A2223204813

Product Type: Rear Right 2WD Air Strut Assembly without ADS, W222 2WD Basic Airmatic Air Suspension Shock

Assembly Status: Brand new full assembly (including burst-proof air spring, 2WD dedicated damper cylinder, full sealing kit, upper & lower mounting bushings, no ADS solenoid valve)

Material: High strength multi-layer anti-aging high-pressure rubber air spring, rust-proof precision piston rod, high-pressure alloy cylinder, multi-layer composite oil seal, long-life anti-degradation hydraulic damping oil

Production Standard: OEM 2WD parameter replication, high & low temperature pressure test, 2WD load fatigue test, 100% air tightness inspection, precise damping calibration

Compatibility Note: Only fits Mercedes W222 2WD vehicles with basic air suspension without ADS, rear right only. Not for 4WD, ADS-equipped, rear left, ABC or other chassis. Matched with rear left 2WD A2223204713 as pair

Sales Method: Retail, bulk wholesale, full container export orders

Inspection Standard: 100% air pressure holding test, damping coefficient calibration, high-low temperature pressure test, 2WD load fatigue test, dimension & appearance inspection

Packaging: Reinforced neutral carton. Custom color box, neutral export package and OEM logo printing available

Working Condition: City commute, highway cruise and daily driving for 2WD vehicles. Fully compatible with basic Airmatic logic, no electronic adaptation risk

Warning: Only for rear right installation on W222 2WD non-ADS air suspension. Not for 4WD/ADS/rear left/ABC/other chassis. Air tightness test and ride height calibration required after installation

Purchase Suggestion: Highly recommended to replace rear left & rear right as pair (A2223204713 + A2223204813). Match with air spring repair kit, air compressor and valve block for full maintenance to restore balanced rear posture

Compatibility Instruction: A2223204813 is rear right basic air strut without ADS exclusively for W222 2WD chassis. Only fits 2MATIC 2WD vehicles with factory basic Airmatic air suspension without ADS, for rear axle right side only. Paired with rear left 2WD A2223204713 as OEM matched set. Not compatible with 4MATIC, ADS, ABC, mechanical spring suspension, other chassis or rear left position.

Exact Compatible List

1. Mercedes S-Class W222 (2013‑2020): S320, S350, S400, S450, S500 2MATIC 2WD models with factory basic air suspension without ADS
2. Mercedes S-Class W222 Business / Comfort trim, 2WD models with basic Airmatic suspension

Main OE Number: A2223204813 (2223204813)

Interchangeable OE Part Numbers: A2223200213, 222320481389, A2223202000

Interchange Remark: The above OE numbers are OEM superseded replacement parts for W222 2WD rear right non-ADS air strut. Identical 2WD dimension, damping parameter, air spring pressure rating and mounting holes. Direct bolt-on replacement without chassis modification.

Q1: What vehicles and position does A2223204813 fit? A: Fits 2013‑2020 Mercedes W222 S-Class 2MATIC 2WD with basic Airmatic suspension without ADS, only for rear axle right side. Not compatible with 4WD, ADS-equipped, rear left, ABC, mechanical suspension or other chassis codes.

Q2: Can I install 4WD ADS air strut on this 2WD non-ADS vehicle? A: No. Non-ADS base vehicles lack wiring harness and control program. Fitting ADS strut will trigger permanent fault codes, mismatched height and disordered chassis posture.

Q3: Can A2223204813 be fitted to rear left? A: No. This is dedicated rear right strut for 2WD. The dedicated rear left part number is A2223204713. Rear left and rear right differ in structure, damping and mounting points, cannot be swapped.

Q4: Coding required after replacement? A: No coding or programming needed. Only perform air tightness inspection and vehicle height calibration, clear fault codes for normal operation.

Q5: What symptoms indicate replacement of this rear right strut on W222 2WD? A: Rear right sagging, overnight rear drop, uneven rear height, frequent compressor operation, slow or stuck height adjustment, bouncy rear end over bumps, poor rear stability at high speed and abnormal chassis noise. No electronic warning lamp but abnormal posture. These are typical signs of air spring leakage and aging.

Q6: Only one rear side damaged on 2WD car, do I need to replace in pair? A: It is recommended to replace rear left and rear right together (A2223204713 + A2223204813). 2WD chassis requires consistent damping and support force on both rear sides. Single side replacement leads to uneven rear height, minor pull during driving and inconsistent bounce, affecting ride comfort.

Q7: Can it be installed on 4WD low-spec model without ADS? A: No. 4WD chassis has different load, suspension stroke and support parameters from 2WD. Improper installation causes insufficient support, rear sway at high speed, abnormal posture and air suspension system error.

Q8: Are interchange OE numbers directly replaceable? A: Yes. All interchange OE numbers are equivalent OEM superseded parts for W222 2WD rear non-ADS air strut, same size, damping and structure, supporting direct bolt-on replacement.

1. OEM Private Label: Support logo silk printing, neutral no-mark export package and custom color box, suitable for Amazon, eBay, AliExpress, and other cross-border platforms.
2. Bulk Supply: A2223204813 in continuous stock. Support retail, bulk wholesale and full container export orders, stable supply, fast lead time and competitive price.
3. Complete 2WD Air Suspension Package: One-stop supply of full W222 2WD air suspension spare parts, including rear left/rear right non-ADS air struts, air springs, air compressors, air dryers, valve blocks, height sensors and repair kits. Can be paired with A2223204713 as rear axle pair set.
4. E-commerce Material Support: Free product photos, detail pictures, OE cross reference table, W222 2WD fitment list, left-right pairing table and installation calibration documents, ready for store listing, short video promotion and page decoration.