Place of Origin:
China
Brand Name:
SuspAir
Certification:
CE
Model Number:
4809034010
Key Selling Points: ✅ Exclusive rear left air spring bag for Toyota Sequoia 2008-2020 full range, non-interchangeable with rear right to avoid wrong installation and rework ✅ Thickened multi-layer EPDM rubber with excellent anti-aging, anti-ozone, high and low temperature resistance, effectively solves common faults of original air springs such as air leakage, rear-end sagging and body tilt ✅ 1:1 OEM precision molding, fully consistent with original stroke, nozzle angle, base hole position and sealing size, supporting non-destructive direct installation without cutting or chassis modification ✅ 100% high-pressure air tightness tested piece by piece, eliminates micro leakage, static pressure loss and bumpy abnormal noise, with stable sealing performance and longer service life than ordinary aftermarket parts ✅ Independent air bag replacement solution, reusable original intact shock core and electronic components, no need to replace the complete shock assembly, greatly reducing air suspension maintenance cost
Product Description: 4809034010 is a dedicated rear left air spring bag for Toyota Sequoia (2008-2020). The rear left and rear right air springs of this model have different structures, bases and strokes and are strictly non-interchangeable. This part is only suitable for the rear left position and cannot be used for rear right or front suspension. It solves common long-term faults of original air springs, including rubber aging, surface cracking, fold rupture, slow air leakage under temperature alternation, water seepage pressure relief, left rear-end sagging, uneven body height, suspension warning light alarm and loose rear abnormal noise when passing speed bumps. Adopting off-road vehicle reinforced cord fabric + thickened EPDM rubber structure, the product has passed professional anti-aging, anti-fatigue and anti-ozone treatment, adapting to complex working conditions such as off-road bumping, high-speed driving, extreme heat and cold. Optimizes the inherent defects of short service life and easy pressure loss of original factory air springs. 100% reproduced according to original vehicle data, the mounting position, telescopic stroke, sealing area and nozzle direction fully match the original standards, realizing non-destructive in-situ replacement without chassis modification. As an independent air bladder, it only replaces the aging and damaged air bag while retaining the original intact shock core and electronic parts, with high maintenance cost performance, which is a mainstream replacement part for repair shops and cross-border auto parts stores.
> Note: This is an exclusive rear left air spring bag for Toyota Sequoia. Rear left and rear right are non-interchangeable, not for front suspension; only fits factory air suspension models, not applicable for mechanical spring versions.
Fully interchangeable part numbers:
> Matching Note: Rear left = 4809034010, Rear right = 4808034010. The two structures are different and cannot be mixed or incorrectly installed.
A: No. The rear left and rear right air springs of Toyota Sequoia have completely different structures, strokes and base points and are not universal. The front and rear suspensions differ greatly. Wrong installation will cause air leakage, sealing failure and fault codes. This part is only for rear left position.
A: No. This product only fits models equipped with factory original air suspension. The mechanical spring chassis has no reserved structure for air spring installation.
A: Replace only the air bag if the original shock core is oil-tight, with normal damping, no cylinder deformation and no abnormal noise, only the air bladder is aged, cracked, leaking or causing rear-end sagging. If the shock core has oil leakage, damping attenuation, internal wear or cylinder deformation, it is recommended to replace the complete rear air shock assembly.
A: Yes. Air tightness leakage test, vehicle height matching and fault code clearing must be completed after installation. Uncalibrated installation will cause abnormal rear height, vehicle tilt and continuous suspension alarm.
A: No. This is an independent rear left air spring bladder, only equipped with air bag and dust cover. Shock absorber core, solenoid valve, sealing clamps, gaskets, height sensor and other auxiliary accessories need to reuse original parts or be purchased separately.
A: No. This model is exclusive for Toyota Sequoia with special chassis parameters, air spring stroke and mounting points. Cross-model installation is prohibited.
Send your inquiry directly to us
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews