37106874594 Rear Right Air Suspension Shock Strut with EDC for BMW  7-Series G11 G12

37106874594 Rear Right Air Suspension Shock Strut with EDC for BMW 7-Series G11 G12

1. Product Introduction

Original Interchangeable OE Numbers (Iterative Compatible): 37106874594, 37107915954

Product Name: BMW G11/G12 7-Series Rear Right Electronic Air Shock Absorber Assembly with ADS Adaptive Damping

Mounting Position: Rear axle right side (Exclusive for rear right, universal for 2WD/4WD models; Not applicable for rear left or front wheels. Perfectly paired with rear left shock absorber 37106874593 to form a complete rear axle set)

Product Description

OE 37106874594 is the original factory part number dedicated to the rear right electronic air shock absorber for BMW G11/G12 new 7-Series. The official iterative upgraded replacement part number is 37107915954. These two part numbers feature 100% bidirectional interchangeability with identical mounting hole positions, working stroke, air spring volume, damping parameters and electronic control logic, requiring no distinction of vehicle years or production batches. As a core wearable maintenance part for the rear air suspension system of BMW 7-Series flagship vehicles, this product fits all G11/G12 high-spec models equipped with factory rear air suspension. The rear air suspension structure is fully universal for both 2WD and 4WD versions, featuring huge market replacement demand and serving as a must-have popular part for auto repair and cross-border inventory stocking.

The BMW G11/G12 7-Series features a large body size and high curb weight. The rear axle bears long-term tail load, rear passenger weight and continuous bump impact during daily operation, leading to common original factory faults after long-term use. The rubber of the rear right air spring ages, hardens and cracks, causing slight air leakage, rear right vehicle sag, unbalanced rear body height and overnight rear collapse. Aging and attenuation of internal hydraulic damping oil and pressure failure of high-pressure oil seals result in loose rear wheel bouncing, obvious residual vibration over road bumps, floppy chassis feel and reduced high-speed driving stability. Aging and signal drift of the original ADS adaptive solenoid valve will trigger dashboard air suspension warning lights, disabled adaptive damping adjustment and frequent start-stop operation of the air compressor. Long-term faulty driving will cause progressive wear on precision accessories including air distribution valves, body height sensors and air pump assemblies, further inducing cascading failures of the entire air suspension system and greatly increasing vehicle maintenance costs.

This G11/G12 rear right air shock absorber assembly is 1:1 mold-manufactured strictly in accordance with original factory OE data. It adopts upgraded thickened multi-layer explosion-proof aging-resistant imported rubber air spring, anti-rust precision piston rod, multi-layer composite high-pressure sealing structure, long-lasting anti-fade hydraulic oil and original-matched high-sensitivity electronic components. All finished products have passed 100% high-pressure air tightness pressure holding tests, high and low temperature durability tests, heavy-load fatigue tests and electronic signal calibration. It thoroughly solves common rear right air suspension faults including air leakage, rear sag, loose damping, chassis abnormal noise, electronic fault reporting and adaptive function failure. Supplied as an integrated full assembly with complete supporting accessories, it supports lossless in-situ bolt-on installation without chassis modification or wiring coding. After simple vehicle height calibration and air suspension adaptive matching, it can fully restore the original tight chassis texture, horizontal body posture and all intelligent air suspension functions. With an ultra-low after-sales failure rate, it is perfectly suitable for high-end auto precision maintenance, bulk auto parts stocking and cross-border export business.

Core Advantages

• ✅ Universal for 2WD/4WD: G11/G12 rear air suspension fits all drive versions, simplifying inventory management effectively
• ✅ Dual OE Iterative Compatibility: 37106874594 / 37107915954 bidirectional replacement covers all production years and batches
• ✅ Rear Right Exclusive Structure: Precisely matches original rear right data in hole position, connector, pipeline and damping parameters to avoid wrong installation
• ✅ Original ADS adaptive electronic control system with stable signals and zero fault codes, retaining factory intelligent damping adjustment function
• ✅ Upgraded thickened explosion-proof air spring with wide temperature resistance and anti-aging performance, completely solving chronic rear right air leakage and rear sag faults
• ✅ Full assembly delivery with plug-and-play installation and simple calibration, extremely low after-sales failure rate
• ✅ Perfectly matched with rear left shock absorber, paired replacement completely solves body tilt and loose chassis problems

2. Custom Attributes for E-commerce Listing

Brand Fit: BMW

Chassis Code: G11 / G12 (New 7-Series)

Vehicle Model: All BMW 7-Series high-spec models with factory rear electronic air suspension

Version Fit: Factory rear axle ADS adaptive electronic air suspension version (universal for 2WD/4WD)

Not Compatible: Rear left position, front wheel position, low-spec mechanical shock absorber models, old F01/F02 chassis, models without rear air suspension

Year Range: 2015‑Present All G11/G12 7-Series models equipped with factory rear air suspension

Mounting Position: Rear axle right side (Rear right exclusive)

Interchangeable OE Number: 37106874594, 37107915954

Product Type: G11/G12 Rear Right Electronic Air Shock Absorber Assembly, Rear Axle Adaptive Air Suspension Strut

Assembly Status: Brand-new complete assembly (Including air spring, damping cylinder, ADS electronic solenoid valve, full sealing kit, upper and lower mounting rubber mounts)

Material: Imported multi-layer high-pressure aging-resistant rubber, precision anti-rust piston rod, high-pressure alloy cylinder, composite high-pressure oil seal, long-lasting anti-fade hydraulic oil, high-sensitivity electronic components

Manufacturing Standard: Original OE parameter replication, 100% high-pressure air tightness test, damping calibration, high & low temperature durability test, heavy-load fatigue test, full electronic signal inspection

Fitting Remark: Exclusive for G11/G12 rear right, universal for 2WD and 4WD models with dual interchangeable OE numbers. Only fits high-spec models with factory rear air suspension, incompatible with mechanical suspension and old chassis. Rear left and right paired replacement is recommended.

Sales Mode: Single retail, rear axle left-right pair set, bulk wholesale, full container export order

Inspection Standard: 100% air tightness pressure holding test, damping coefficient calibration, high & low temperature durability test, fatigue test, electronic signal detection, full dimension & appearance inspection

Package: Neutral heavy carton, custom color box, unbranded export package, OEM logo labeling available

Working Condition: Suitable for daily commuting, highway cruising, full-load travel and complex road conditions, fully compatible with original rear axle intelligent air suspension control logic

Installation Tip: Lossless in-situ installation with no modification or coding required. Vehicle height calibration and air suspension adaptive matching are mandatory after installation.

Recommended Purchase: Rear left and right shock absorbers have synchronous aging cycles. Paired replacement is strongly recommended to eliminate body tilt, rear wheel residual vibration, loose chassis and high-speed instability. Can be matched with air suspension repair kit and height sensor for synchronous maintenance.

3. Compatible Vehicle List

Compatibility Note: This OE part is a universal rear right electronic air suspension part for BMW G11/G12 new 7-Series, compatible with both 2WD and 4WD models. It covers all 2015+ high-spec 7-Series vehicles equipped with factory rear air suspension. Not compatible with old F01/F02 chassis, mechanical suspension low-spec models, front wheels or rear left position.

Precise Compatible Models

BMW 7-Series G11/G12 (2015–Present): 730d, 730i, 740d, 740i, 750d, 750i, M760Li all versions with factory rear ADS electronic air suspension (universal for 2WD/4WD)

4. Interchangeable OE Numbers

Fully Interchangeable OE List (100% Bidirectional Replacement):

Main OE: 37106874594

Iterative Replacement OE: 37107915954

Interchange Remark: The two numbers are original factory annual iterative upgraded replacement parts with identical dimensions, air spring volume, damping parameters, electronic plug signals and mounting hole positions. They can be freely interchanged and directly installed in the aftermarket with no adaptation difference, no modification and no coding required.

5. FAQ

Q1: Are 37106874594 and 37107915954 interchangeable?

A: Absolutely yes. The two are original iterative universal models with identical structure and parameters, fully interchangeable for all G11/G12 rear right air suspension vehicles.

Q2: Does it fit both 2WD and 4WD models?

A: Yes. G11/G12 rear air shock absorbers share the same structure and parameters for 2WD and 4WD models with full universal compatibility.

Q3: Can it be installed on rear left or front wheel position?

A: No. This part is rear right exclusive. Rear left and front shock absorbers have different structures, damping rates and plug layouts. Misinstallation will cause fault codes, abnormal body posture and suspension functional failure.

Q4: Can it be retrofitted on low-spec models without air suspension?

A: No. Low-spec vehicles lack air suspension pipelines, air pumps and electronic control systems, making hardware retrofitting impossible.

Q5: Is coding required after replacement?

A: No coding required. Only vehicle height calibration, air suspension adaptive matching and fault code clearing are needed for normal operation.

Q6: What symptoms indicate replacement of this rear right air shock absorber?

A: Rear right body sag, unbalanced rear right height, overnight rear collapse, excessive rear wheel bouncing and residual vibration over bumps, loose chassis, poor high-speed stability, air suspension warning light, frequent air compressor operation and reduced rear riding comfort.

Q7: Is single-side replacement acceptable?

A: Not recommended. Rear left and right shock absorbers have synchronous service life and aging degree. Single replacement causes inconsistent left-right damping force, body tilt, driving deviation and uneven tire wear. Rear left and right pair replacement is strongly recommended.

Q8: Is it compatible with old F01/F02 7-Series?

A: Not compatible at all due to completely different chassis structure, air suspension system and electronic interfaces.

6. Custom Service

• OEM Labeling Service: Support logo silk printing, neutral unbranded export packaging and custom color boxes, suitable for cross-border platforms including Amazon, eBay, AliExpress .
• Bulk Supply Service: G11/G12 rear right air shock absorbers are in stable long-term stock with full dual OE coverage. Support single retail, rear axle pair sets, bulk wholesale and full container export orders, featuring stable supply, fast delivery and high cost performance.
• Complete Air Suspension Supporting Parts: One-stop supply of full G11/G12 air suspension series parts, including front & rear shock absorbers, air springs, air compressors, distribution valves, height sensors and repair kits for complete vehicle maintenance orders.
• E-commerce Material Support: Provide free product real photos, detailed close-up images, OE parameter tables, compatible vehicle lists and installation calibration documents for store decoration, product listing and short video promotion.